Specification: Input rated voltage: 110V AC Input frequency: 47-63Hz Rated input power: 600W Charging current: 20A Charging voltage: 24V Efficiency: 90% Operating temperature: 0℃～40℃ Operating humidity: 20%～85% Working mode: Switch-type microcomputer single-chip control Charging mode: Microcomputer single-chip four-stage constant voltage and constant current control Product Weight: 4.6 Pounds NOTE: Our 24V charger comes with a spare plug and two terminal pins for wide compatibility with all 24V vehicles, including electric pallet jack, forklift, golf cart, floor scrubber, sightseeing car, etc. You don’t need to worry about plug adaptation. Even if your vehicle's charging plug does not fit the charger's plug connector, you can replace the charging plug connector on your vehicle with the spare plug connector provided (Easy to operate, just connect the battery cable to the spare plug connector), and then plug it into the charger's Anderson connector. Warm Tips: 1. This forklift battery charger 24V is specially designed for charging lead-acid batteries. It cannot be used as a general power supply for other device. 2. For safety reasons, if the 24V forklift charger is not used for a long time or the battery is saturated, it is recommended to remove the socket and disconnect the power supply. 3. When charging is complete, disconnect the AC power socket and then disconnect the battery terminal cable connector. The order cannot be reversed. 4. Please place it in a cool and ventilated place when charging.